MCB

MCB distributed by Shrinath Electric provides MCB that’s substituting the rewireable switch-fuse units for industrial applications in an exceedingly swift manner. The MCB is a blend of all three functions like protection of short circuit, overload, and switching within the wiring system. Protection of overload by employing a bimetallic strip & short circuit protection by a used solenoid.

These are obtainable in several pole versions like single, double, triple pole & four poles with neutral poles if necessary. the traditional current rating ranges from 0.5-63 A with an asymmetrical short circuit breaking capacity of 3-10 KA, at a voltage level of 230 or 440V.

In commercial applications, single-pole breaker circuits safeguard 20V branched circuits, and double pole breaker circuits safeguard up to 240V branched circuits. During this miniature breaking circuit, the voltage rating could be over that of the circuit voltage, but it’ll not be less than the circuit voltage.

A Miniature Circuit Breaker (MCB) is an electrical switch that automatically shuts off power to low-voltage electrical circuits if an overload or short circuit causes too much current flow. MCBs have a maximum current rating of 125 A and do not have adjustable trip characteristics. They can also be thermally operated or thermal-magnetic worked, depending on the design.

Fuses are increasingly being replaced in low-voltage electrical networks with tiny circuit breakers (MCBs). When compared to a fuse, the MCB offers numerous advantages:

When the network is experiencing problems, it automatically shuts down the electrical circuit (both overload and fault conditions). The MCB has a higher sensitivity to changes in current, making it a better choice for detecting certain circumstances.

When the switch is tripped, the operational knob automatically returns to the off position, making it easy to pinpoint the source of the problem. Fuse wires should be checked for blowing by opening the fuse grip or cutting a hole in the fuse base. As a result, an MCB is considerably easier to identify than a fuse if it has been actuated. We, MCCB box manufacturers in India, can serve you better than no one.

Fuse replacement or rewiring is required to quickly restore power in the event of a failure of the fuse. An MCB, on the other hand, can be fixed soon simply by turning a switch. It is safer to use an MCB instead of a fuse because it has a higher current rating. MCBs can be remotely operated but not fused.

Sensitive

They immediately detect any abnormality and switch off the electrical circuit automatically. preventing any damage

Instant start over

The power supply can be resumed almost immediately. The MCB switch simply needs to be pushed back to the On position

Reusable

Compared to other devices it can be used again and has minimal replacement and maintenance costs

We Deal in

 3
 15
 13
 10
Scroll to Top